Mud-club

Vehicle & Technical => Discovery => Topic started by: muddybunny on March 05, 2006, 16:30:13

Title: 300tdi snorkle
Post by: muddybunny on March 05, 2006, 16:30:13

Has anyone put a safari snorkle on a 300, taking off the 200 but don't know how to get the thing to fit the 300 as the air box is in the way????? is it inside the inner wing?????

Title: 300tdi snorkle
Post by: Bobtail on March 05, 2006, 16:44:25

The under bonnet bits are different

As the 200 and 300 have different air boxes

you will proably have to use a 200 air box

Title: 300tdi snorkle
Post by: Tigger on March 05, 2006, 16:46:41

Don't know if it helps, but there are guides to fitting 200 and 300 Snorkels here...

http://members.mud-club.com/library/?category=4


Might give you a few pointers

Title: 300tdi snorkle
Post by: Budgie on March 05, 2006, 16:58:06

The 300 illustrated in the Workshop article that Tim's linked too has ABS and there is a different under bonnet setup for the non-ABS models.

On the non-ABS model the filter box remains where it is and the pipework goes around the shocker turret and into the side of the filterbox.
Here's what mine looks like:

(http://i41.photobucket.com/albums/e267/heb-photos/snorkel04.jpg)

(http://i41.photobucket.com/albums/e267/heb-photos/snorkel03.jpg)

Title: 300tdi snorkle
Post by: muddybunny on March 05, 2006, 18:15:50

thanks that's been a great help :lol:

Title: 300tdi snorkle
Post by: toger on April 11, 2006, 09:54:35

I remember reading somewhere that the 200 airbox was more efficient than the 300 and thus worth retrofitting.