Mud-club

Vehicle & Technical => Defender => Topic started by: Matt_H on March 10, 2006, 20:41:35

Title: 90 disc brake bias valve
Post by: Matt_H on March 10, 2006, 20:41:35

Been looking at the bias valve on the 90 (which has had a disc brake conversion)... It doesn't look quite right to me (far too complicated for double discs and it's about 5 times the size of the disco one)

Can anyone post a picture of a 90 with factory fitted rear disc brakes so I can compare please?

If it's wrong would swapping the disco one over be ok?

Matthew

Title: 90 disc brake bias valve
Post by: Porny on March 23, 2006, 22:55:34

will do tomorrow.... is dark and cold now!!!


Ian

Title: 90 disc brake bias valve
Post by: Matt_H on March 23, 2006, 23:14:50

thanks matey!

Title: 90 disc brake bias valve
Post by: Porny on March 24, 2006, 17:14:39

Matt....

Sorry, but I can't take any pics until Monday.... my 90" is in my works carpark until then..... sorry


Ian

Title: 90 disc brake bias valve
Post by: Porny on March 27, 2006, 17:06:17

Not the best pictures, but then it's not the easiet thing to get too!!!!


Ian

Title: 90 disc brake bias valve
Post by: Porny on March 27, 2006, 17:10:49

Also....

Two systems are listed on the parts system, one with the bias valve, and one without.  Both are for Disc front and rear systems.

Just depends which one Land Rover decided to fit I think.... :?