Mud-club

Vehicle & Technical => Range Rover => Topic started by: big rob on March 14, 2006, 21:54:52

Title: Kenlow thermostate disconnected
Post by: big rob on March 14, 2006, 21:54:52

Hi chaps ,
went to Aldermaston last Sunday had great day, but my twin fans stopped working, after stripping them down and cleaning they are as good as new.However as I am a complete "edit" I disconnected the thermostate switch for cleaning whilst cleaning the rad and I forgot to write down where the two wires go on the C, NC, NO, connectors I have the live feed from the cab and the lead which goes to the relays, I've checked the fans and everything is working apart from my brain, Can anyone help with the correct wiring or if you have a kenlow switch maybe take a look and let me know, many thanks Rob. :-k

Title: Kenlow thermostate disconnected
Post by: H on March 15, 2006, 07:13:24

live feed to c live out to the fans to NO. relays???  :(scared): mines wired from the battery to a switch on my dash back to the thermostat, ummmm should I have a relay on there? bought the kit 2nd hand with no wiring instructions.

H

Title: Kenlow thermostate disconnected
Post by: big rob on March 15, 2006, 21:08:47

i've looked at what you've said and hey presto fans work again, thanks for your help,
Rob

Title: Kenlow thermostate disconnected
Post by: H on March 15, 2006, 21:34:57

np bud!

H

Title: Kenlow thermostate disconnected
Post by: Range Rover Blues on March 17, 2006, 01:52:19

C=common, NO=normally open (off), NC=normally closed (on).  So use C and NO terminals.

Title: Kenlow thermostate disconnected
Post by: big rob on March 17, 2006, 14:59:07

A helpful chap at work has explained the in's and out's of wiring to me, and he tells me that a relay is needed as the switch could burn out. I have relays as I have checked.But H please have a look as this guy knows his stuff as he wired our factory.
cheers Rob