Mud-club

Vehicle & Technical => Discovery => Topic started by: strangerover on March 20, 2006, 21:42:49

Title: 200TDI Safari Snorkel template needed
Post by: strangerover on March 20, 2006, 21:42:49: I recently rolled my first disco... its a write off

so I bought another..

trying to swap my snorkel over, but I need a template,
my old wing was bent to blazes before I fitted the template..

can any one help ?
Title: 200TDI Safari Snorkel template needed
Post by: Bobtail on March 20, 2006, 23:34:30: I have one you can borrow where are you?
Title: 200TDI Safari Snorkel template needed
Post by: strangerover on March 20, 2006, 23:46:05: In Liverpool, when i get the thing taxed if your not too far away I could drive over and mark it up (fit it),

cheers... were are you ?
Title: 200TDI Safari Snorkel template needed
Post by: nickW on March 21, 2006, 10:07:10: i could also do with one as im about to buy a 2nd hand snorkel
Title: 200TDI Safari Snorkel template needed
Post by: hobbit on March 21, 2006, 13:09:24: I suppose i was lucky with mine I managed to get the wing with the snorkel too :wink:
Title: template
Post by: bobtail4x4 on March 21, 2006, 19:26:30: I could use one too, otherwise I will have to guess :lol:
Title: 200TDI Safari Snorkel template needed
Post by: J B on March 21, 2006, 20:16:37: i got a 200 template, pm me if ya want it

ta jon
Title: Template
Post by: Jimbrown on March 31, 2007, 19:16:01: I have a template and the fitting instructions too maybe tim could make a copy of these things so he could send them out as a disposable sticker so they are easy to find and they would be much easier to use. any one wants this one though pm me your address.
Title: 200TDI Safari Snorkel template needed
Post by: narked on March 31, 2007, 19:48:54: Need to get hold of a template for a 200tdi Safari snorkel too.

Gonna be fun working out how to route hoses to fit it to the 300 airbox though! Might just rip that out in favour of one of a 200, not decided yet.
Title: 200TDI Safari Snorkel template needed
Post by: Lyndsey731 on March 31, 2007, 19:56:55: Narked, I put my old Southdown snorkel from my 200 onto my 300, chucked the 300 airbox away and fitted the old 200 box, absolute breeze and allowed room for the winch battery at the same time

Gav
Title: 200TDI Safari Snorkel template needed
Post by: narked on March 31, 2007, 20:00:18: Aye figured it'd be easier that way. Still, I only put a new air filter in last week! (cheap [!Expletive Deleted!] ain't I?! ;) ). Whilst trying to work out how I was going to go about fitting the snorkel I opened the air box for the first time. Took one look at the filter and realised most of the air was probably bypassing it all together it was in that bad a state! New filter has turned it into a new motor!
Title: 200TDI Safari Snorkel template needed
Post by: Jimbrown on March 31, 2007, 21:25:12: This may help and the template still available to first person asks for it and sends me address

http://cgi.ebay.co.uk/LANDROVER-DISCOVERY-200-AIRBOX_W0QQitemZ330101856991QQcategoryZ31348QQtcZphotoQQcmdZViewItem
Title: 200TDI Safari Snorkel template needed
Post by: narked on March 31, 2007, 21:39:43: You have a pm.
Title: 200TDI Safari Snorkel template needed
Post by: narked on March 31, 2007, 22:01:16: Right, first person to pm me gets it once I've finished with it!
Title: 200TDI Safari Snorkel template needed
Post by: blueboar on March 31, 2007, 23:01:14: cant you just make your own template bydrawing around the hole and measuring it??

http://www.discoweb.org/ and click on tech section for Safari Snorkel Install
Title: 200TDI Safari Snorkel template needed
Post by: Jimbrown on April 01, 2007, 02:59:54: Quote
blueboar Posted: Sat Mar 31, 2007 9:01 pm Post subject:

--------------------------------------------------------------------------------

cant you just make your own template bydrawing around the hole and measuring it??

I suppose you could but it also includes the bolt holes too, it's much easier to do with the template rather than hit and miss measuring from one contour to another and hoping you dont cut too much of your wing away.
Title: Hopefully with you today
Post by: Jimbrown on April 04, 2007, 19:30:24: Hi Matt hopefully you should have recieved template this morning best of luck with it I have got to sort head gasket out now :( :evil: :?
Title: 200TDI Safari Snorkel template needed
Post by: narked on April 05, 2007, 16:18:47: Got it today, but it may have been delivered yesterday as I wasn't around then.

My 200 airbox arrived today too :D
Title: 200TDI Safari Snorkel template needed
Post by: Jimbrown on April 05, 2007, 19:16:39: you decided to go down the 200 airbox route then good move the 300 v8 is a right t**t to do by comparison dunno about the 300 tdi not seen that one done but at a guess is similar to the v8 airbox.
Title: 200TDI Safari Snorkel template needed
Post by: narked on April 05, 2007, 19:24:48: Looked like it was going to be an awkward job, hence why I've gone the 200 airbox route. There's not much room between the standard airbox and the inner wing to route a hose round that way, not much room between the airbox and the engine to route a hose that way and round the back of the box to the wing, no room above, and not much space on the side of the airbox to cut a new inlet in line with the snorkel.

So I decided to save myself a big headache :P Just need to look at how much work is gonna be involved in fitting the 200 airbox.