Mud-club

Vehicle & Technical => Defender => Topic started by: TechnoTurkey on April 05, 2006, 14:00:28

Title: Oil filler/rocker breather
Post by: TechnoTurkey on April 05, 2006, 14:00:28

The above is quite loose on my 90, how are these meant to be secured please?

Thanks

M

Title: Oil filler/rocker breather
Post by: Singlefin on April 05, 2006, 14:10:48

I had same problem with my old landy. I tried wrapping it in gaffer tape - bad plan!
You probably just need to replaced the ribbed rubber bit (fnar fnar). I think they're only a handful of change.

Title: Oil filler/rocker breather
Post by: TechnoTurkey on April 06, 2006, 13:57:50

Ta, just found a guy on ebay who sells them so hopefully it will solve the problem.

Title: cap
Post by: timberdog on April 06, 2006, 20:29:49

They should have a Metal nodual on the inside of the cap which when you push and turn the Oil cap they lock together...

Failing that and be carefull with this one...Stuuf some rag in the Oil filler top {Make sure you can retrieve it}, and drill the Oil Cap and top of The Oil filler on block and self Tap screw...i used to have to do this on my old TD as it had pressure problems and it was that bad it used to blow the Cap off!!!! :shock:

didnt move when drilled ..