Mud-club

Vehicle & Technical => Discovery => Topic started by: Rangie3.0LtrDan on April 09, 2006, 13:16:00

Title: Drag link end ball joint repair kit!
Post by: Rangie3.0LtrDan on April 09, 2006, 13:16:00: Ok guys, this is the picture of all the parts, i am reluctant to take it apart until i know the order these are sposed to go in!

If someone could help i would be grateful!

Also do i have to pack it full of one shot (or CV as i have that as well) grease to make it work??

Cheers

Dan
Title: Drag link end ball joint repair kit!
Post by: Damonski on April 09, 2006, 13:57:30: Whats the famous words? Refitting is reversal of the removal ;)

Have you got the rave disc?
Title: Drag link end ball joint repair kit!
Post by: Rangie3.0LtrDan on April 09, 2006, 13:59:59: Sorry, forgot to add the picture of the bits! lol, but yes i have rave, doesnt show you the order the repair kit works in though.
Title: Drag link end ball joint repair kit!
Post by: hobbit on April 09, 2006, 17:45:55: Managed to find this diagram

May be of help
Title: Drag link end ball joint repair kit!
Post by: Rangie3.0LtrDan on April 09, 2006, 17:54:37: Cheers for that Kev, i struggled to find any diagrams! Thats most useful :D
Title: Drag link end ball joint repair kit!
Post by: hobbit on April 09, 2006, 18:08:05: I think this may be the order

I think the seal on the left is for above the ball joint, and I presume E is the spring washer for holding the boot onto the case

It was over a year ago I last stripped one of these

If there is any mistakes please people let me know

Watch out when you pop the bottom circlip off they have quite a pressure behind them, if you can take the whole arm off the box, its a lot easier to do in a vice on a bench
Title: Drag link end ball joint repair kit!
Post by: Rangie3.0LtrDan on April 09, 2006, 18:16:10: i thought the ball thing with the thread on it went inbetween 5 & 6 with the thread going through the top of 6?? so i have been told lol
Title: Drag link end ball joint repair kit!
Post by: hobbit on April 09, 2006, 18:18:20: Just added to my previous post, not 100% sure now, thought I had a pic of the last one I took apart but cantr find the flaming thing now
Title: Drag link end ball joint repair kit!
Post by: Rangie3.0LtrDan on April 09, 2006, 18:19:41: LOL ok, mate, your help is appreciated nonetheless!
Title: Drag link end ball joint repair kit!
Post by: Xtremeteam on April 09, 2006, 18:22:51: Quote from: "Disco200TDiDan"
i thought the ball thing with the thread on it went inbetween 5 & 6 with the thread going through the top of 6?? so i have been told lol

thats correct :wink:
Title: Drag link end ball joint repair kit!
Post by: hobbit on April 09, 2006, 18:25:24: Quote from: "RedlineMike"
Quote from: "Disco200TDiDan"
i thought the ball thing with the thread on it went inbetween 5 & 6 with the thread going through the top of 6?? so i have been told lol

thats correct :wink:

Thanks for that,
"we all make mistakes", said the dalek climbing of the dustbin :wink: :lol:
Title: Drag link end ball joint repair kit!
Post by: Rangie3.0LtrDan on April 09, 2006, 18:25:26: Cheers again Mike! lol
Title: Drag link end ball joint repair kit!
Post by: Rangie3.0LtrDan on April 09, 2006, 18:28:04: LOL i like the dalek/dustbin analogy lol