Mud-club
Vehicle & Technical => Discovery => Topic started by: nickW on April 20, 2006, 18:42:39
-
i have a safari snorkel off a 200 disco to fit my v8, has anyone got any pics of a 200 fitted to a v8 and does anyone have a copy of the fitting/drilling template and fitting instructions
-
There is a Workshop artice on fitting a 200TDi safari snorkel. Have a look in there, it may help. :wink:
When you do yours, might be good to do an article yourself. :wink:
-
cheers, also is it possible to buy different filter boxes, for k and N filters or are the filter boxes all the same, aren't k and N's the same size as standard filters
-
When we got our Safari snorkle from Paddocks it arrived in a box with V8 written on it. It had a piece of pipe and an air filter adaptor for use on the V8 and for the 200tdi you fit it without. I'm pretty sure that the bits for fitting to a V8 could be found elsewhere or bought direct from Safari.
If you have a look on the Safari web site they have some expanded digrams that will show you what bits you need.
-
I think I have a 200 tdi snorkle template somewhere. I'll have a look over the weekend and let you know.
-
cheers reaper
-
does anyone have any under bonnet pics of a snorkel on a V8 setup
-
does anyone have a contact adress for safari snorkel UK
-
The Safari main site is http://www.safari4x4.com.au
They have diagrams of all the parts.
It might be worth putting up a wanted post. If anyone has bought a 200tdi snorkle it is likely that, like us, they had the V8 bits in the box too. We passed ours on to someone wanting to do the same as you.