Mud-club

Vehicle & Technical => Range Rover => Topic started by: Greybeard on April 27, 2006, 13:20:53

Title: Fitting Replacement Door Seals on a early 2 Door.
Post by: Greybeard on April 27, 2006, 13:20:53

Anybody have a clue how to fit new door seals. I thought they might have been push on like my newer rrc.
These fit into a channel that is rivetted onto the door aperture lip.

I am currently admitting defeat .
Cheers
Steve.

Title: Fitting Replacement Door Seals on a early 2 Door.
Post by: Greybeard on April 28, 2006, 10:48:59

So do i take it nobody on here has ever fitted replacement door seals to an early 2 door range rover then ??

Title: Fitting Replacement Door Seals on a early 2 Door.
Post by: chris9119 on April 28, 2006, 11:56:58

Steve

If its the same as the tailgate rubber, then there should be an access point where the rubber pushes in and is then pushed around.

The only other way is to feed it in with a blunt tool.......

On my 84 RRC, it just pushes over a lip.

Sorry cant help anymore, but at least someones responded to you.

Good luck.

Chris

Title: Fitting Replacement Door Seals on a early 2 Door.
Post by: blackbob on April 28, 2006, 15:57:37

you need to push it in place with a tool like a wide scraper and some wd 40 in the lip and it takes time to do