Mud-club

Vehicle & Technical => Discovery => Topic started by: paul and sam on May 07, 2006, 01:01:38

Title: morning all
Post by: paul and sam on May 07, 2006, 01:01:38

morning all i wonderd if anyone can help me, where on the dash is the warning light for the diff lock warning on my disco its a k plate and i dont know what the warning light should look like  :(stoopid): many thanks










and they say this is ment to be fun :(biglaugh):

Title: morning all
Post by: POTASH on May 07, 2006, 02:20:32

it is on the panel where all the rest of the warning lights are, it shold show an axle with 4 wheels on, and it will light up amber when diff lock is selected

Title: morning all
Post by: bezzabsa on May 07, 2006, 08:13:32

but check the bulb before stripping it down....as someone close to me found out  :(

Title: morning all
Post by: the loon on May 07, 2006, 11:19:20

Does it go into diff lock ok?

If not first course of action that I would sudgest is get underneath and spray a good shot of WD40 on the linkage.
Had a similar problem on my disco where couldnt select diff lock but when looked underneath found the linkage was caked in crud so cleaned off all the muck and a good blast of WD40 and problem solved.

Title: morning all
Post by: Bush Tucker Man on May 07, 2006, 20:13:09

Have a browse around this Yankee site, it might help answer questions about freeing it off

http://home.twcny.rr.com/eeibooks/rover/discodifflock.htm