Mud-club

Vehicle & Technical => Discovery => Topic started by: mud-club-matty on May 15, 2006, 21:39:05

Title: how do the wings come of a 200 series
Post by: mud-club-matty on May 15, 2006, 21:39:05

hello got to take a pair of wings of is it just the top row or screws and then they are off

Title: how do the wings come of a 200 series
Post by: sulley on May 15, 2006, 21:48:40

ISTR that there will also be some inside the mud guard area.

Title: how do the wings come of a 200 series
Post by: Xtremeteam on May 15, 2006, 21:58:45

row of screws along the top,bolts down the back behind the door & a bolt behind the headlight & 1 at the bottom where the sill is

Title: how do the wings come of a 200 series
Post by: mud-club-matty on May 15, 2006, 22:02:33

is it easy and is it in the work shop manual

Title: how do the wings come of a 200 series
Post by: Xtremeteam on May 15, 2006, 22:41:16

its easy if you know what ur doing

Title: how do the wings come of a 200 series
Post by: Tyke on May 16, 2006, 08:24:18

Quote from: "RedlineMike"

its easy if you know what ur doing

And if the screws arn't siezed solid from all the water and crap  :twisted:

Impact driver and big hammer if they are  :wink:

Title: how do the wings come of a 200 series
Post by: barmiebrumie on May 16, 2006, 09:23:15

Quote from: "mud-club-matty"

is it easy and is it in the work shop manual

Are you taking them off to sell ?,




John.

Title: how do the wings come of a 200 series
Post by: hobbit on May 16, 2006, 19:09:45

Its what you find behind the wing you wont to worry about

Title: how do the wings come of a 200 series
Post by: mud-club-matty on May 16, 2006, 20:54:14

yer im takeing them of as iv sold them to pornys bro

Title: how do the wings come of a 200 series
Post by: fram on May 16, 2006, 21:33:54

Hobbit, I think it's more a case of what you DON'T find that you should :shock:

Title: how do the wings come of a 200 series
Post by: Porny on May 17, 2006, 10:47:44

You best not damage them getting them off!!!!  :wink:  :shock:
(if needs be, we could take them off)


Ian

Title: how do the wings come of a 200 series
Post by: hobbit on May 17, 2006, 14:24:56

Quote from: "fram"

Hobbit, I think it's more a case of what you DON'T find that you should :shock:

Replacement front quarter to go in place, and already done the welding up the footwell, figured out why my carpet was getting wet though. Nothing to do with the rust, but the rubber grommet for the radio aerial was out, and it is below the drain hole for the screen run off :wink:

Just need a rain free day to put it back together


As for the wing removal, I took the door off to make life easier, bit heavy but easily removable, two clips on the top of the hinge pins and drift out the swing stop bar, also have to unplug the electrics and feed them out through the hole in the panel

The wing is hooked under the plastic trim near the screen pillar so have to slide it out carefully, but not to hard at all