Mud-club
Vehicle & Technical => Range Rover => Topic started by: gtomo2 on June 04, 2006, 15:10:49
-
After fixing all the oil leeks at the front end of my rr, now the rear axle is leeking oil from the seal were the prop gos into the diff housing so just wondering anybody changed to oil seals before on the rear axle if so how long and hard is it to do. also noticed rear axle is starting to whine when pulling away from stand still, but not if coasting down hill. Could that be caused by the oil leek (oil getting low in the diff).
Thanks
-
i have done one before easy mate you will have no problem :wink:
have a look here http://members.mud-club.com/library/?articleid=12
-
No and me thinking it would be a night mare. May just be able to do it next weekend. :wink: Thanks
-
tomo i done one before
-
tomo i done one before
Oh very good you may end up doing another one :wink:
-
i will help you out if you want
-
Will see how it goes, But will keep you in mind if i am stuck
-
if you do it this weekend i wont be able to after 2 on sat as im goin landrover world
-
not sure when i will be doing it as will have to get the seal kit for it but will need money first. Not to bothered at the moment got a 5 ltr can of diff oil to use in it
-
ok mate cool just give me a ring if you need help
-
You see mate told you there easy :wink:
-
You see mate told you there easy :wink:
Yes thanks for your help :wink: they are easy if you have a nice compressor and air tools :wink: Dam 23 year old bolts :D