Mud-club

Vehicle & Technical => Discovery => Topic started by: Dr Neil on June 11, 2006, 22:32:12

Title: cambelt question
Post by: Dr Neil on June 11, 2006, 22:32:12

can anyone tell me if there is any diferences between the 200 and 300 tdi's when it comes to changing the timing belt?
I can see you don't need to disturb the waterpump but is the timing of the engines the same and the tensioning of the belt? I have a landrover workshop manual for the 200tdi but wondered what the differences were.

thanks in advance

Neil.....

Title: cambelt question
Post by: BrumLee on June 11, 2006, 23:25:44

300tdi is easier, but you must check to see if the modified pulley's have been fitted. Book time is about an hour less to change a 300 and you can do it without removing the radiator.

Title: cambelt question
Post by: bilge rat on June 12, 2006, 06:40:56

youll find the tension is set slightly lower on the c/belt aswell. alan.....

Title: Cambelt
Post by: nzoliver on June 12, 2006, 20:54:55

Howdy,

Have changed mine, but the specialist here mentioned that a pulley change was not nescesary  - only if there was an issue with the belt. He inspects the belt being taken off and if there is any sign of the belt not running 'true' then a pullet change may be required. I have done 3 now and have not had to change the pulleys on any of them.

Anyone want to comment?

 :roll: