Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: Fuddy as muck on June 17, 2006, 15:21:59

Title: Just replaced the Rad. But how many litres?
Post by: Fuddy as muck on June 17, 2006, 15:21:59

As titled really just want to know how many litres of water to put back in. Thanks in advance :)

Darren

Title: Just replaced the Rad. But how many litres?
Post by: Canada Al on June 17, 2006, 19:13:59

Just fiil it up till its full . I used to take off a heater hose to let the air out . Reconect the heater hose when water starts coming out and top up the rad till its full . :D

Title: Just replaced the Rad. But how many litres?
Post by: Fuddy as muck on June 17, 2006, 19:24:13

Quote from: "Canada Al"

Just fiil it up till its full . I used to take off a heater hose to let the air out . Reconect the heater hose when water starts coming out and top up the rad till its full . :D

 :shock: You sure?

I'm not meaning to question you but i certainly wouldnt do that to the car. If i serviced the car that is :lol:

Ah stuff it, the Land rovers bullit proof :lol:

Darren

Title: Just replaced the Rad. But how many litres?
Post by: mark.yellow.series.3 on June 17, 2006, 19:44:58

al's right, the heater is the highest point in the water system, so air will naturally get trapped there. fill up the system to the top, then remove the heater hose and purge the remaining air out. sorted.

Title: Just replaced the Rad. But how many litres?
Post by: Fuddy as muck on June 18, 2006, 11:03:45

Thanks Al and Mark :wink:. All done and sorted now :D

Darren