Mud-club

Vehicle & Technical => Discovery => Topic started by: john66 on June 26, 2006, 09:14:53

Title: Removed ABS codes. Light still on
Post by: john66 on June 26, 2006, 09:14:53

Hi. I have removed all ABS error codes as it says on-(http://members.mud-club.com/library/?articleid=19) . I have removed sensor cleaned it and re-possitioned,checked all wires and all ok and error codes have not reterned but abs light is still on. What next ?
 (V8 1995 Disco)

   John

Title: Removed ABS codes. Light still on
Post by: Range Rover Blues on June 26, 2006, 10:42:19

Stupid questions forst, have you driven it yet? the light goes off at 5 mph.

Ok then did you replace the relay?

Have you re-checked the ECU for new faults?

If so then it's time to check out the wiring or replace the ECU.  You need access to the RAVE cd or similar for the test procedures as stipluated by LR.

I'll have a look later if I remember

Title: Removed ABS codes. Light still on
Post by: john66 on June 26, 2006, 15:40:48

Yes i have driven it and it stayed on, when the wife gets home i will try swapping over the relay with one of the others. I did re-check the fault codes after driving and the had not come back.

Title: Removed ABS codes. Light still on
Post by: john66 on June 26, 2006, 18:40:14

Many thanks Range Rover Blues,
It turned out to be the relay after all.
I did swap the relay over the other day, but this wasn't the root cause of the problem, and I didn't try this again after correcting the fault.
Thanks for the suggestion!
john.

Title: Removed ABS codes. Light still on
Post by: Daz800 on June 26, 2006, 19:10:54

2nd relay problem this week.
Sunday the same thing happoned to my uncles saab.