Mud-club

Vehicle & Technical => Range Rover => Topic started by: dazzawhipple on July 15, 2006, 17:35:36

Title: Funny Mettalic Squeak
Post by: dazzawhipple on July 15, 2006, 17:35:36

I have a loud squeak its not wheel bearing but a dull squeak from the front end area, it comes on only when I accelerate

Any ideas???

Darren

Title: Funny Mettalic Squeak
Post by: banditman on July 15, 2006, 18:18:20

Mine was a siezed propshaft U/J (diff end) and a totally [!Expletive Deleted!] one at the gearbox end wirth no needles in one cup

Worth a try?

Title: Funny Mettalic Squeak
Post by: dazzawhipple on July 15, 2006, 18:27:40

Just been toying with that,


Darren

Title: Funny Mettalic Squeak
Post by: dazzawhipple on July 15, 2006, 20:10:52

Quote from: "banditman"

Mine was a siezed propshaft U/J (diff end) and a totally !Expletive Deleted! one at the gearbox end wirth no needles in one cup

Worth a try?

yes the uj on the transfer box kaput :(



Well done banditman

Darren

Title: Funny Mettalic Squeak
Post by: mark.yellow.series.3 on July 15, 2006, 21:58:07

ive just replaced my propshaft uj's and bearings. quite an easy job, but you want to get the better quality 'hardy spicer' uj's with the grease nipples on them. they cost my £7.00 something each from paddocks, and a new drive flange for thr prop was £9.00.