Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: Cheggs on July 27, 2006, 17:51:12

Title: Series bell housing's
Post by: Cheggs on July 27, 2006, 17:51:12

Hi,
    I bought a 2.5 di Ford engine w/ a series 3 adapter plate to go in my series 2a will it fit on my gear box or will I have to change my gearbox also/ :shock:

Title: Series bell housing's
Post by: ian_s on July 27, 2006, 20:01:35

all the series ii/iia/iii gearboxes are interchangeable, although they might have different clutch assemblies

they are defnatly the same stud pattern
stick with the one you have, you shouldnt have any problems

Title: Series bell housing's
Post by: Neil Jones on July 28, 2006, 22:41:34

the clutch mechanisms are different, and are on opposite sides, assuming that what you say you have is actually what you have (I only say this because I know how much Landy's can change over the years without you having any knowledge).  If they are different either change the bellhousing, or the gearbox.

Title: Series bell housing's
Post by: 22900013A on July 31, 2006, 15:53:28

The bellhousing is different on 2.25 vehicles compared to 2.6, so be awae of that one.

Title: Series bell housing's
Post by: Cheggs on August 01, 2006, 08:16:35

Thanks Gents,
                     I shall let you know how I get on.