Mud-club

Vehicle & Technical => Discovery => Topic started by: Andy. on July 29, 2006, 20:25:36

Title: Leak?
Post by: Andy. on July 29, 2006, 20:25:36

Hi all, long time away I know but need some advice?

I'm leaking water from where I guess the water pump is housed. Checked all the hoses and they are fine. It's dripping from the gasket seal to the pump housing?

Coolant tank is empty and when filled it just drips out again?

Help, ideas, advice please?

Title: Leak?
Post by: extreme90 on July 29, 2006, 22:09:34

200 or 300 ?

Title: Leak?
Post by: Andy. on July 29, 2006, 22:41:10

Oops sorry, 200, as the reg plate shows  :wink:

Title: Leak?
Post by: Bush Tucker Man on July 29, 2006, 22:58:23

Sorry to butt in, but :roll:

In a Brian Blessed/ Prince Voltan/Flash Gordon, quizical exclamation
(I think??)



"He's Alive!"

Hello Andy

How's Jane & little un??

(& the 2 terrors??)

Title: Leak?
Post by: hobbit on July 29, 2006, 23:10:27

The obvious thing is the gasket, but there is normally a tell tale hole in the casting near where the shaft enters the housing on the pump, try to move the pump sideways by holding onto the pulley, if it moves it means the pump has had it

the coolant leaks through the shaft seal and out this hole

Title: Leak?
Post by: Andy. on July 29, 2006, 23:25:45

Cheers Kev.

Hi Richard.

Everyones OK, Jayne and little Ruby are fine, nearly 4 months old now. Boys are great too, enjoying there summer holidays with the weather the way it is.

Me, I'm a bit swallon at the minute, having had the snip last Thursday, so a bit tender  :lol:

Nice to hear from you, how's the 110 doing?

Title: Leak?
Post by: Andy. on July 29, 2006, 23:26:54

And if I remember rightly he said "Gordons Alive!!"