Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: landroverkeith on August 04, 2006, 18:24:54

Title: electric probs already
Post by: landroverkeith on August 04, 2006, 18:24:54

ok my brake lights now dont seem to wanna work along with the idicators :( i have a spare arm for the indicators so i know that will solve that problem but how do i solve the brake lights?

cant find the switch on the peddle even though i know there must be one there sumwhere

problems all started in the downpour we had here last friday everything worked fine until the rain i did have to drive a very deep section of water on the road home though !

any help plz cos i wanna take me baby to work and park outside the offices heheheh  :twisted:

Title: Brake light switch is either on the brake line at the bottot
Post by: dave_2A_2.25Turbo on August 04, 2006, 19:29:56

Brake light switch is either on the brake line at the bottom of the bulkhead, or on the pedal box just behind the servo/master cylinder

Title: Re: Brake light switch is either on the brake line at the bo
Post by: hobbit on August 05, 2006, 22:40:43

Quote from: "dave_2A_2.25Turbo"

Brake light switch is either on the brake line at the bottom of the bulkhead, or on the pedal box just behind the servo/master cylinder

More than likely the latter look for a pair of wires next to the servo

carefully pull them off and touch them together (with ignition on if needed) get someone to check the back, it will at lease rule out the switch