Mud-club
Vehicle & Technical => Discovery => Topic started by: Skibum346 on August 07, 2006, 08:17:06
-
I don't yet have a manual for my Disco 1 and I need to check out the bulbs in the rear drivers side cluster. I have no sidelight nor brake light and I suspect they ar on the same bulb as the indicator, revers & fog lights all work.
Do I need to take apart the dickie seats and all the trim to get in?
Advice from you more experienced Disco owners would be gratefully received!
Kindest
Skibum
-
The easiest way unless you have are a trained contortionist, or have a very biddable 7year old is to remove the seats.
It's annoying to have to do so, but only the bottom 2 pivot-bolts require removing
They're a TORX 30, or 35, then a cross-head screw for the trim-cover
Be aware the plastic nuts holding the cluster in place can be tight
-
Thanks matey.... Guess I'll be doing some cursing tonight then...
:cry:
-
Oh, & don't lose the sealing gasket under the light unit, or you'll have a leak.
Put a touch of vaseline, or silicone grease on the cluster threads & run the nuts up & down a couple of times before re-installation.
They'll re-fit easier.
-
Managed to get mine out with the seat's still in, but have got the scratch marks on my arms to prove it :roll: ,
John.
-
Managed to get mine out with the seat's still in, but have got the scratch marks on my arms to prove it :roll: ,
John.
Did that yesterday trying to get the bottom radiator hose for my wifes RRC V8 with Air con & LPG, off and back on again.
Suppose I could go for the matching set!
Don't suppose anyone has access to a digital image of the layour they could let me see...?
Skibum