Mud-club

Vehicle & Technical => Discovery => Topic started by: Colin 009 on September 07, 2004, 01:22:41

Title: Changing Shocks?
Post by: Colin 009 on September 07, 2004, 01:22:41

Hi All,

Blew a front shock at Billing sunday and a back one is leaking, now should I just replace shocks or go for a full springs/shocks change.

Motor has done 68000 miles, and ride has always felt a bit harsh over bumps and cracks in road.

Now do I replace with O.E or go with other makes.

Sorry to be asking this question but after reading past posts still can't make a choice.

Title: Changing Shocks?
Post by: muddyweb on September 07, 2004, 07:58:21

You don't necessarily need to change the springs provided they are in good condition, and just changing the dampers will be cheaper by far.

If you are feeling harshness over lumps and bumps now, I would recommend a good oil-filled damper replacement, either Genuine or an OEM alternative (avoid the pattern parts IMHO)

Unless you have a specific need, you don't have to go to the expense of changing to a different type.

RCV is listing a Boge damper (which I believe is OE) at 20 quid, and an OEM alternative at 17.50.   ( www.land-rover-parts-shop.com )

Title: Changing Shocks?
Post by: toger on September 07, 2004, 09:09:57

Tim,
What exactly is the secret of your Custom Suspension System with 2.5 inch lift.
Is it OME by any chance please :?:

Title: Changing Shocks?
Post by: muddyweb on September 07, 2004, 09:27:35

Quote from: "toger"

Tim,
What exactly is the secret of your Custom Suspension System with 2.5 inch lift.
Is it OME by any chance please :?:

Nope, although I am looking at changing a couple of bits in the near future.

I currently run DeCarbon dampers with a set of springs made up to my own specs, along with a few other little bits and pieces I've added here and there.

Title: Changing Shocks?
Post by: hobbit on September 07, 2004, 09:28:42

Did a spring and shocker change on the front my disco last sunday, the springs were weak and low, I used heavy duty rangey springs and munroe gas shocks, One hell of a difference, mind you the springs were right down before the change, the whole front end was raised 2/3 inches

The other half needs a step ladder to get in now, mind you I need a stool to work in the engine bay too  :lol:  :lol:

The ride is a hellavalot better, bumps and humps are soaked up lovely, considering that the worst I'll be doing in this is green laning

Gonna do the back soon I reckon, she's tail low at the moment

kev

Title: Changing Shocks?
Post by: Colin 009 on September 07, 2004, 12:30:17

Thanks Guys, anyone else got an opinion.

Title: Changing Shocks?
Post by: muddyweb on September 07, 2004, 12:33:10

I see... *our* opinions not good enough for you now then !?

 :wink:   :lol:

Title: Changing Shocks?
Post by: Colin 009 on September 07, 2004, 12:40:17

Oh.. god, didn't mean to upset anyone.  :o  :wink:

You I'm just getting as much info as poss.

How do I tell what condition the springs are in.