Mud-club

Chat & Social => The Bar - General Chat => Topic started by: ritchiea2005 on September 11, 2006, 21:27:32

Title: help!!!!!!!!
Post by: ritchiea2005 on September 11, 2006, 21:27:32

can anyone help me out ive just come to torque the big end bolts up on a 300tdi engine im messing with at home only to realise ive left my autodata book at work  ](*,)  ](*,)  ](*,)  anyone got a haynes book at home?? any help appreciated

Title: help!!!!!!!!
Post by: dave_2A_2.25Turbo on September 11, 2006, 21:34:07

think my Haynes is in the car - I'll go and look......

Title: help!!!!!!!!
Post by: ritchiea2005 on September 11, 2006, 21:35:36

thanks

Title: help!!!!!!!!
Post by: dave_2A_2.25Turbo on September 11, 2006, 21:38:14

Big End cap nuts = 59Nm or 44 lbf ft - use new fasteners on refitting

Anything else? (while it's out)

Title: torque settings
Post by: tomcat on September 11, 2006, 21:38:58

hi mate.
 big end caps  59nm/44lbf ft
 main bearing cap bolts  133nm/98lbf ft
                             hope this helps. :D  :D

Title: help!!!!!!!!
Post by: ritchiea2005 on September 11, 2006, 21:40:49

cheers both must go finish before the pub shuts :lol:

Title: help!!!!!!!!
Post by: dave_2A_2.25Turbo on September 11, 2006, 21:42:53

Thats thing with Autodata books btw - they're always were they're no good - mine's at work too

Title: help!!!!!!!!
Post by: blade on September 11, 2006, 22:41:32

get it on cd like me then its where ever you want

Title: help!!!!!!!!
Post by: ritchiea2005 on September 12, 2006, 01:13:04

i have it on cd as well and guess what?  thats at bleedin work as well.  cheers for your help lads engines built and i made the pub, RESULT  :D