Mud-club
Vehicle & Technical => Discovery => Topic started by: monksie on September 19, 2004, 19:11:55
-
Hi there everyone new member with a question, anybody out there got a wiring diagram for adding aux driving lamps into my main beam circuit :?:
monksie.........
aka saudidisco D.O.C.
-
Use a relay to feed the lights and take the main beam power as the power to switch the relay.
As long as running aux lights on the main beam is legal wherever you are.
Personally I take feed off the main beam circuit through a switch (with a light) then to the relay.
Ed
-
Have a look at :
http://imageserver.muddyweb.com/gen/auxlights.JPG
It shows a rough diagram of how to do it.
-
thanks for the quick replies guys, been a great help :!: as for location Ed located in Saudi in a little town called Dhahran/Al Khobar, may have seen it a few months ago on the news :?: local vehicle testing MVPI aka MOT is a little strange on the subject bein as your car wont pass with them fitted [will wire in bullet connectors for quick removal] even if they come as standard equipment including fog lights etc.
Gary...................
aka monksie [aka saudidisco]
-
Hi Gary nice to see you've found Mud Club :wink:
There are some wiring diagrams on http://www.discoweb.org. in the tech section. It's the last link on the LHS of the page.
HTH.
Andy (also of DOC :D ).
-
Another 2p's worth (mine's along the line of Tim's but straighter lines :lol: :P )
Look on page 2 of 'disco mods' for a couple of diagrams...
http://community.webshots.com/user/chrisw70
-
Bloomin cheek...
That highly technical drawing took me minutes to complete !
-
Thanks for the great tips, drawings and links guys really useful :D good to know help is on hand from so many miles away from all you experts ........ mean it honest :wink:
Cheers All.......... Gary