Mud-club

Vehicle & Technical => Range Rover => Topic started by: tonka toy on September 20, 2006, 10:30:02

Title: exhaust
Post by: tonka toy on September 20, 2006, 10:30:02

Hi all

just had the rear box fall off my 3.9 classic, can anyone tell me if the pipe joins over the axle near the middle of the car?

and where is the best place to get one from

cheers  neil

Title: exhaust
Post by: Budgie on September 20, 2006, 12:28:19

If it's anything like our 3.5 then the rear section joins into the rear of the center silencer. Ours has the single pipe through to the back box and then exits as a twin.

If you're just looking for the standard rear section then somewhere like Paddocks would be a start and they are about £40 for the rear section.  :wink:

Like the new Avatar BTW!  :mrgreen:

Title: exhaust
Post by: tonka toy on September 22, 2006, 19:57:28

martin it looks like it joins somewhere near the centre box,i will give paddocks a ring

cheers

neil

Title: exhaust
Post by: 4 landies on September 23, 2006, 07:39:31

when mine got a hole in I removed just the box and sleeved it with a straight pipe out the back

Title: exhaust
Post by: hairyasswelder on September 29, 2006, 21:32:45

Hi try this link, select your year and if it got cat then you get full exploded drawing  :D

http://www.buypartsby.co.uk/exhausts_display.php?pageNum_rs_timax=1&totalRows_rs_timax=13&txtmodel=Range+Rover&Submit=Next&txtmake=LAND+ROVER

Ok copy and paste, cant make it a link

Steve

Ok so it does it itself  :oops:

Title: exhaust
Post by: Range Rover Blues on October 03, 2006, 02:10:01

The twin pipes were only fitted to 3.5 carb models, 3.5 EFi had a single pipe and 3.9 EFi had a bigger single pipe, plus a different rouoting anround the gearbox crossmember, which is different.