Mud-club

Vehicle & Technical => Range Rover => Topic started by: Rangie3.0LtrDan on September 25, 2006, 13:53:15

Title: Torque Settings
Post by: Rangie3.0LtrDan on September 25, 2006, 13:53:15

Does anyone have the torque setting to hand (i.e. before tomorrow afternoon) for the nut that holds the drop arm in place on a 3 bolt steering box.

Cheers

Dan

Title: Torque Settings
Post by: DEANO3528 on September 25, 2006, 20:28:12

125 lb/ft

Title: Torque Settings
Post by: Rangie3.0LtrDan on September 25, 2006, 20:29:17

aha, most thankingfulness :D

Title: Torque Settings
Post by: DEANO3528 on September 25, 2006, 20:37:39

S'okay. Wedge a piece of wood between chassis and arm or strap it, rather than forcing it against it's internal stops. That's what I do anyhow.

Title: Torque Settings
Post by: Rangie3.0LtrDan on September 25, 2006, 20:39:13

OK, that made no sense whatsoever to me, but then i dont know anything about this kind of thing lol

Title: Torque Settings
Post by: Rangie3.0LtrDan on September 26, 2006, 15:44:22

Right have done it now :D with the ammount of torque and the ammount of thread lock i used, it aint going anywhere lmao