Mud-club

Vehicle & Technical => Suzuki => Topic started by: colin on October 02, 2006, 22:27:57

Title: jimny diff breathers
Post by: colin on October 02, 2006, 22:27:57

want to fit diff breathers to my jimny, but do the vent caps just pop off the diffs or do  any bitts fall in the diff . i already have lods of pipe around to use.
any info please
thanks colin :?

Title: jimny diff breathers
Post by: Evilgoat on October 03, 2006, 09:01:00

In the vit the hoses just pull off. I would expect the Jimny to be the same.

Title: jimny diff breathers
Post by: jims jimny on October 03, 2006, 14:48:42

they just prise off with a screwdriver
i've run mine from back axle along chassis up into engine bay and the front just straight up into engine bay
don't forget to put a bend at the top of each pipe otherwise water will get down ( defeats the object then dun it )

                       jim

Title: jimny diff breathers
Post by: colin on October 03, 2006, 18:46:46

thanks guys
did you do the transfer box.

i thought you where selling that jimny.
also how do you fit hight lift jacking points to the jimny

many thanks colin

Title: jimny diff breathers
Post by: jims jimny on October 04, 2006, 12:04:25

it's an absolute pig to fit t-case breather its right on top most people i know hav'nt bothered ( if u get water that high you'll drown the bloody thing )
as for jacking points fit rocksliders to each side(next job for me )

                                          jim

Title: jimny diff breathers
Post by: colin on October 04, 2006, 20:27:52

thanks for info jim
colin

Title: jimny diff breathers
Post by: colin on October 28, 2006, 16:34:01

breathers now done thanks for help