Mud-club
Vehicle & Technical => Discovery => Topic started by: pritch on October 16, 2006, 23:40:27
-
I've just changed the left-hand stalk on my 200TDi Disco.
However, the indicators don't self-cancel any longer. Anyone got any ideas why, or what I may have done wrong?
-
indicators dont cancel (well, left indicator) on my RRC.....
-
if its the same set up as I used to have on the 90 theres a plastic ring that sits in behind the steering wheel and it has a raised section that catch's on the stalk and that turns the indicator off
Maybe the ring is out of alinegnment (had this problem on the 90 - easily fixed just remove steering wheel and re-aline)
Or it could be the ring is actualy damaged - if so try a breakers
-
It is a similar if not the same setup. Could also be the stalk itself? Someone told me rover metro stalks work (they look the same) but when I tried one, the indicators didnt work. I got it from a scrapper with no battery to so I couldnt test it 1st.
Anyone know ow true this is?
-
I have used stalks from Maestro vans before and they work OK - same door handles as classic range rovers too :roll:
As landyloony has already said - you will have fitted the new stalk without lining it up with the self cancelling ring - easy fix on a 90/110 - just unscrew the cowling and fix in situ
Don't know how easy this is to remove on a disco though - but surely must be easier than taking steering wheel off
-
Well, I'll give it a go when I get a round tuit.
It's actually the proper part, ordered new from Paddocks. And for what it's worth, taking the steering wheel off is surprisingly easy, once you've prised the badge out.
-
for what it's worth, taking the steering wheel off is surprisingly easy, once you've prised the badge out.
In which case it should be easy to check/sort then !