Mud-club

Vehicle & Technical => Discovery => Topic started by: Fitz on October 15, 2004, 10:47:03

Title: Bullbars
Post by: Fitz on October 15, 2004, 10:47:03

Will bullbars from a 200Tdi 1993 fit a 300Td1 1994?

I have seen a set for sale but don't want to buy them if the front end is different.

Any help would be appreciated.

Dave

Title: Bullbars
Post by: Wanderer on October 15, 2004, 15:30:26

I would doubt that a 200 bar would fit on a 300.
I had a 300 bar on my 200 and it sat further away from the grill. I'd say that a 200 bar won't have enough room on a 300. It's down to the bumper changes on the 300.

Ed

Title: Bullbars
Post by: Wanderer on October 15, 2004, 15:31:30

Give Formula 4x4 a ring.
I also had to cut the valance on my 200 to get the 300 bar to fit.

Ed

Title: Bullbars
Post by: Stripes on October 16, 2004, 08:12:15

the 200 and 300 tdi aren't interchangeable as i found out to my cost :oops:

the holes for the 200 are above each other but on the 300 they are staggered
hope this helps  :wink: