Mud-club

Vehicle & Technical => Defender => Topic started by: bonio73 on December 09, 2006, 17:32:04

Title: Guess the oil leak!
Post by: bonio73 on December 09, 2006, 17:32:04
Can someone enlighten me as to what this oil leak is coming from is called?  Is this a potential big job to fix?  I'm guessing that the diff needs draining and then remove the axle end to replace the seal?
Title: Guess the oil leak!
Post by: extreme90 on December 09, 2006, 17:33:15
what oil leak from where  :roll:
or am i being thick again  :oops:
danny
Title: Guess the oil leak!
Post by: bonio73 on December 09, 2006, 17:34:06
sorry mate - trying to add a photo - having problems - bear with me.
Thanks
Title: Guess the oil leak!
Post by: extreme90 on December 09, 2006, 17:35:44
:lol:
is it coming from where the prop bolts on ?
if is its the pinion oil seal or if like me, its a loose ish oil filter dripping down onto diff making it look like its leaking  :oops:
Title: Guess the oil leak!
Post by: TDi90 on December 09, 2006, 17:45:47
thats not an oil leak! you only need to worry when it leaves a little pool on the ground after standing for a couple of hours!
Title: Guess the oil leak!
Post by: Xtremeteam on December 09, 2006, 17:46:59
i would be slightly concerened by that as it appears to be leaking from between the chrom ball & the axle casing rather than the normal bit at the bottom of the chrome ball,
could be the bolts are loose or stretching
Title: Guess the oil leak!
Post by: bonio73 on December 09, 2006, 18:06:36
Additional photo now upped - with captions!!!!
Title: Guess the oil leak!
Post by: extreme90 on December 09, 2006, 22:31:42
hehe u got a problem there, they dont usualy leak as mike said in another words  :roll:
bolts might have stretched as he said, its very unlikely that they have come loose as they are complete and utter arses to undo in the first place
undo the ring of bolts and inspect and fit a new gastket
danny
Title: Guess the oil leak!
Post by: bonio73 on December 10, 2006, 09:33:49
Cheers :)
Title: oil leak
Post by: scouse lanny on December 10, 2006, 11:40:16
just had to do my swivel bearing had to take that part off it should just b a gasket needs replacing good look get it off  :lol: and i would take a wire brush and a tin of waxoyl to that axle and chassis mate it makes mine look new  :lol: and its only a 1991  :wink:
Title: Guess the oil leak!
Post by: bonio73 on December 10, 2006, 12:40:11
Thanks bud - thinking about getting it steam cleaned and sprayed with waxoyl. Only had it a couple of weeks, so trying to prioritise jobs that need doing :(
SimplePortal 2.3.5 © 2008-2012, SimplePortal