Mud-club

Vehicle & Technical => Defender => Topic started by: Big G on December 18, 2006, 18:36:45

Title: Seat Mod and Security Box
Post by: Big G on December 18, 2006, 18:36:45

Well if I got it right there should be some pictures of the seat mod that has made a fantastic difference to the leg room and driving position. Also fitted a security box while I was at it. Thanks to all for the advice.......spot on![/u]

Title: Seat Mod and Security Box
Post by: Big G on December 18, 2006, 18:40:39

Another one.....

Title: Seat Mod and Security Box
Post by: Big G on December 18, 2006, 18:41:59

and the box..

Title: Seat Mod and Security Box
Post by: Big G on December 18, 2006, 18:48:13

The box section was cut to size, I used inch and a half. The holes were a nightmare to get right because the captive nuts were sitting at differing angles meaning that the holes drilled for the bolts had to be done at an angle.
If you do this mod remember that one of the bolts sits right above the fuel tank so make sure its not too long.....!

Undid the seat cover and threshed the head rest out as well.......this means you can move the seat back even further.......

I am six 2 and it has made the world of difference.

Title: Seat Mod and Security Box
Post by: Big G on December 18, 2006, 18:51:14

Last one...........painted the box section red so it dont look outa place..!

Title: Seat Mod and Security Box
Post by: muck_truck on December 18, 2006, 19:05:27

Is your head not too close to the head lining now ?  im 6' 1 1/2"  :lol: and could do with a bit more leg room.

Title: Seat Mod and Security Box
Post by: Big G on December 18, 2006, 19:08:18

Thats my next mod..........plane some of the top of me head...... :shock: