Mud-club

Vehicle & Technical => Defender => Topic started by: disco blue on January 02, 2007, 13:20:06

Title: WIPER MOTOR
Post by: disco blue on January 02, 2007, 13:20:06

HI any body know what colour goes where on wiper motor. thanks

Title: WIPER MOTOR
Post by: V8MoneyPit on January 02, 2007, 14:54:36

I am assuming you are trying to wire up the plug on the end of the harness to plug into the park switch on the motor? if so.....

Looking at the plug from the back (where the wiring enters it), hold it so the 4 parallel terminals are vertical so you have one horizontal terminal across the top. Then:

Bottom left - Red/Light green
Top left - Blue/Light green
Top - Black
Top right - Brown/Light green
Bottom Right - Light green/Orange

Hope that makes sense.

Title: wiper motor
Post by: disco blue on January 02, 2007, 16:26:08

thanks  have no harness  need to know  where   yellow. blue.ect go just to get fast  speed wipe from .different on off switch  thanks

Title: WIPER MOTOR
Post by: V8MoneyPit on January 03, 2007, 16:40:11

Not sure which of the three wires on the motor itself (red/yellow/blue) does what.

In terms of what they connect to, the blue one connects to the black earth wire in the harness.

The yellow goes to the blue/light green.

The red goes to the red/light green.

Not sure if that helps at all, but it's all I can establish.

Title: WIPER MOTOR
Post by: disco blue on January 03, 2007, 19:33:35

HI thanks it does help it means blue is earth thanks

Title: WIPER MOTOR
Post by: V8MoneyPit on January 04, 2007, 16:54:46

Well, at least that's where it goes on the back of the park switch!! I am making an assumption that it feeds directly through the switch to the plug.