Mud-club
Vehicle & Technical => Suzuki => Topic started by: essieb on January 04, 2007, 19:39:40
-
firstly happy new year
1,wont always go into first gear so have to go into rev first ,its worse when cholks a little out but still happens when in its a replacemnt box not 6 mts ago also can be sticky going 1 -2
2,speedo stopped working again cheaked cables into transfer all seems ok an tips
oh thanks in advance
oh ita a h samuri
-
Gears...... Release Bearing ?
Speedo.... Kinked Cable ? Rounded End (s) ?
-
hi m8
not able to get gears is most likely ur clutch not ur gear box
speedo you say you have checked the cable to the t-case have you took it out of the t-case to check the end hasn,t snapped off inside if all is well t-case side it may of popped out of the speedo at the back
let us no
simon
-
hi m8
not able to get gears is most likely ur clutch not ur gear box
speedo you say you have checked the cable to the t-case have you took it out of the t-case to check the end hasn,t snapped off inside if all is well t-case side it may of popped out of the speedo at the back
let us no
simon
got new clutchHigh profile i think{t.o.t.r from kap}
cant see owt on cable will cheak proper in dayligh ta m8ties
-
did you get new thrust bearing with the kap kit?
if so i wud say stretched cable
simon
-
did you get new thrust bearing with the kap kit?
if so i wud say stretched cable
simon
would think cost enough so but will try look 2moz if all else fails will go bug darren{kap}ta
-
Sounds like the thrust bearing to me... But with out getting it apart you'll never know.
-
What about the bearing in the flywheel?
This is usually forgotten about and can cause selection problems aswell.
As for speedo, check the console/clock as well as transferbox speedo drive.