Mud-club

Vehicle & Technical => Discovery => Topic started by: gtomo2 on January 06, 2007, 14:57:01

Title: lpg mixture
Post by: gtomo2 on January 06, 2007, 14:57:01

Anyone know how to turn the lpg up on a single point injector system as the lpg guy turned my right down when i had problems with it but now its running great on petrol but is very underpowered on gas to the point were if i floor the loud pedel the engine dies through lack of gas so i need to turn it up.
Thanks

Title: lpg mixture
Post by: mark300 on January 06, 2007, 16:42:17

hi, im not 100 perc but on the evaporator there is a brass flat head type screw,depending on the set up,try turning this half a turn at a time,cant remember wich way but youll know, i set my ranger on my mates gas analiser and it made a difference, you could also replace the mixer on the throttle body for a bigger one so it lets more air/gas in, this makes quite a difference  :D

Title: lpg mixture
Post by: gtomo2 on January 06, 2007, 16:47:45

Thanks will have a look in the morning i know he had a spanner and screw driver in his hands when he turned it down just didnt see were and yes he was playing with the evaprator.