Mud-club
Vehicle & Technical => Discovery => Topic started by: simon15 on January 10, 2007, 17:02:52
-
Some of you may know i went to look at a 3 dr disco last weekend but both front inner arches were rotten at the tops inside engine bay also was some rust in the rears too.
How much would it cost to get it sorted?
Would it just be a case of welded up or replacement arches?
Also how much do u think it is worth?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=016&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=260071867227&rd=1&rd=1
-
The parts, including the rear floor, would be around £200 but it's getting it fitted.
You can use Rangie inner wing repair panels with a bit a alteration.
Would you be doing the work yourself?
If not then it could cost more than the Disco is worth to get the work done. :?
-
Brother in law can do all the welding etc and fitting i can do myself really.
Boot floor is ok just the inner wings themselves..
-
wings are nice and easy to remove, row of bolts accross the top, and some behind door hinges, one against sill nd one near indicator
once its off the inner wings are fairly flat so sometime with a grinder welder and sheet metal should soon sortthe prob
unless they are totally knackered
-
It was just the top edges closest to the wing.
Dammit just found out he has sold it :( :(
-
With the rust in mine, I found it easier to source both front corners of a scrapper and replace the whole piece from the shocker mount round to the edge of the rad unit on both sides
While having the wing off I also patched up any holes on the rest of the inner wing
-
Dammit just found out he has sold it :( :(
Then it wasn't meant to be :wink: keep looking and next time you will have a better idea about fixing them up.
-
I sure will.
At least i know its not the end of the world if the inner wings are rotten, :lol: