Mud-club

Vehicle & Technical => Discovery => Topic started by: beemer on January 14, 2007, 01:29:04

Title: 95 D1 ABS fault code number?
Post by: beemer on January 14, 2007, 01:29:04

I have a 2-3 fault code even after getting a clear code after driving around the block. ABS light never goes out. This is not a mistake and 3-2 code.
It will start out with two long blinks, short blank, short blink, short blank then 2 short blinks, short blank then 3 blinks. It repeats again but starts with one long blink, short blank, short blink then fault blink numbers.
Any ideas as I can not find this fault code?

Thanks in advance. Carl.

Title: abs
Post by: needbeer on January 14, 2007, 02:19:26

have a look in the workshop we sorted my mates abs prob it gives you all of the code and how to fix um heres the link http://members.mud-club.com/library/?articleid=19

Title: 95 D1 ABS fault code number?
Post by: Frankie-Boy on January 14, 2007, 03:26:19

I had exactly the same problem and it turned out to be a wheel sensor had failed, replaced it and problem gone.

They are expensive though, mine was £125 from Devon 4x4, but LR wanted £180 plus VAT.

Title: 95 D1 ABS fault code number?
Post by: jnoshea on February 12, 2007, 20:06:08

If anyone knows for sure what a 2-3 code is, we should add it to the workshop article that I posted a while back as that code is not on the list and I can't find it anywhere on the web either. A broken sensor should show up as 4-12 to 4-15 indicating which sensor has failed.  :?