Mud-club
Vehicle & Technical => Defender => Topic started by: jamesledingham on January 15, 2007, 11:01:11
-
2 questions...
Numero Uno:
I got two new end caps fitted (is this what they're called-the caps that go in the centre of the wheels on the end of the axle..?) a couple of weeks ago. They're cracked and leaking black all over my shiny alloys! I bought a couple more from bearm*** at the weekend. Heated the in hot water and popped them on..only they didn't pop on. Any which way I tried, they just wouldn't click on. Any ideas from anyone?
Numero Dos:
I fitted a van top over xmas - do I need to notify DVLA/insurers? Do either need notifying of rear seats? (I know that's two questions!!)
-
Can't help you with the first one but I know you'll need to notify your insurers about the seats, and almost certainly about the vantop.
-
In regards to question #1 I'd say that you shouldn't be experiencing that problem even if they were cracked ...
I'd check that you'd got good quality replacement parts, either genuine or not made out of a kitkat wrapper.
I'd also check that the axle breather wasn't blocked, as there shouldn't be enough pressure in the axle to make it leak badly enough to make unshiny wheels :?
-
there are two types of caps, make sure youv'e got the right one. from the local dealer they'll cost less than a fiver each, if i remember right.
-
I bought them from the guys behind the counter at bearmach in cardiff and they asked the year etc. I'd guess they're the right ones.
-
When i went from van to station wagon i didnt tell the dvla as there is nowhere on my v5 that says what number of seats i have anyway...........
-
The V5 Says...
Make - Land Rover (Obviously!)
Model/Type - 90 4C SW DT Diesel
Body Type - Light 4x4 Utility
Is this what it should say then?
-
My V5 isn't that detailed, it is just a Defender 90 under model.......