Mud-club
Vehicle & Technical => Defender => Topic started by: Artwigwa on February 04, 2007, 12:31:43
-
Hi, I need to fit a new power stearing pump to my 90Td as it's seized :( , Does anyone have any handy tips on how to fit one?
Thanks
-
hi mate ive just finnised sorting mine out after it sized up along with my belt tensioner ! on a td5 90 the best thing i can suggest is remove/losen the fan belt and just try to turn the pully
it could be just a bearing you need :D if this is the case you need a 15mm socket to remove the bolt in the centre of the pully remember its a LEFT HANDED THREAD :shock:
take it to eny place localy that does bearings thay will normaly remove and refit for you (you can also yous a hi-lift jack to repress the bearing in) should cost no more than a £10.00 as a pose to £25.00+vat for a new one and takes about 30 mins off/on
hope this helps got eny questions just shout me :lol: :wink:
p,s,p at the rear in photo.
](http://[img]http://members.mud-club.com/galleryimages/1ad1460625e72f4dae029a2fedefffd1.jpg)[/img]
-
Hi, Thanks for the info :D Gonna give it a go this weekend. ta