Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: CanIBeFrank on February 12, 2007, 22:10:13

Title: Series 3 wiring loom
Post by: CanIBeFrank on February 12, 2007, 22:10:13

Hi,

Where can I buy a new series 3 wiring loom?

Diesel 88" Series III 1982. With a 2.5 N/A fitted.

Thanks

Title: wiring loom
Post by: reriessandlover on February 12, 2007, 22:22:24

if you find out let me know as well mine is a bit shot

Title: Series 3 wiring loom
Post by: hobbit on February 13, 2007, 03:34:04

Found this one

http://www.autoelectricsupplies.co.uk/about

Someone near me has recently purchased a new loom for his s3 88", not sure on the price though, will get some info off him tomorrow

Title: Series 3 wiring loom
Post by: CanIBeFrank on February 13, 2007, 10:51:39

Thanks Hobbit be good if you could let me know when you find out, much appreciated.

Title: Series 3 wiring loom
Post by: philbert on February 13, 2007, 19:27:02

try here this is where i got mine


http://www.autosparks.co.uk/

Title: Series 3 wiring loom
Post by: CanIBeFrank on February 14, 2007, 10:06:47

Thanks Philbert,

Just out of interest for those reading this in the future the items required for a 1982 88" Diesel Series 3 are as follows;
 
From main harness to engine
LR333  RHD/LHD Engine Harness - Diesel  Ã‚£34.45
 
Main Harness including Ins panel and lights
LR 317 RHD Engine Bay Harness - Diesel   £139.92
 
Rear lights incl fogs etc
LR336  RHD/LHD Chassis Harness - SWB Petrol & Diesel  Ã‚£49.29
 
(Please note the above prices exclude VAT and delivery)  
NB: LR 333 is interchangable with 332 depending on engine sufix.

Personally I find this expensive but I've worked hard on the rest of the truck so it would be a shame not to finish it off properly  :shock:

Title: Series 3 wiring loom
Post by: bob86 on February 14, 2007, 19:44:00

I got a loom for my series 1 from autosparks. Its pretty good quality.

Title: Series 3 wiring loom
Post by: CanIBeFrank on February 15, 2007, 10:18:33

Hi Bob86,

I dont doubt it, the guy I spoke to on the phone was extreamly helpful.

I have at least 2 1/2 looms currently fitted  :?  I should realy just bite the bullet and get it done properly before the whole thing just goes up in smoke.