Mud-club
Vehicle & Technical => Discovery => Topic started by: knocker on February 14, 2007, 21:20:10
-
anyone know how to connect an early disco heated windscreen, it's not a bonded screen and it has two connectors on the top by the mirror and one connector on each side, any help appreciated. i'm thinking a relay (100 amp) and power from the fuse box switched using the same switch as the rear screen ? do i use all four connectors ?
-
The heated element is split into 2 halves, so one pair of connectors are earth, the other 2 are to the relay. In practice LR used a momentarty switch and latching relay with timer, so the heater stays on about 8 minutes IIRC.
-
anyone know how to connect an early disco heated windscreen, it's not a bonded screen and it has two connectors on the top by the mirror and one connector on each side, any help appreciated. i'm thinking a relay (100 amp) and power from the fuse box switched using the same switch as the rear screen ? do i use all four connectors ?
My 93 disco has got a screen just like the one you describe. It has 2 black strips across the top of the screen. I thought it was for an internal aerial, which switch activates it?
-
There should be a momentary switch with an arch shaped window on it.
-
redhand.....the standard screen has two black strips along the top but no elements in the glass, yours may not be heated mate :(
-
redhand.....the standard screen has two black strips along the top but no elements in the glass, yours may not be heated mate :(
Didn't think it would be somehow if it was it'd be the only extra in the vehicle.
-
i was gonna say use spade connectors...... but i wont!! lol
ill get my coat!! hehe
-
8) i'm glad you didn't say spade connectors matt :D :D :wink:
-
hehe :wink: :lol: :lol: