Mud-club

Vehicle & Technical => Defender => Topic started by: iomlr on February 17, 2007, 21:21:44

Title: Qick Question Engine / Gearbox
Post by: iomlr on February 17, 2007, 21:21:44

i have a 1988 swb defender with a j19 type turbo diesel witgh a 5 speed manual, my question is i want to put a 300tdi in so will it be a straight swop or will i need to find another gear box to match? any other modifications needed?

thnk you

Title: Qick Question Engine / Gearbox
Post by: extreme90 on February 17, 2007, 21:34:52

nope, need a r380 long stick gear box,
different props, change the engine/ gearbox mounts, seat box, transmission tunnle, the whole lot basicaly

easier to fit the better 200tdi in, as thats a straight swap  :wink:
and funnily enough ino where theres a minted 200tdi going up for sale shortely  :wink: with a new pump and turbo and is going for next to nuffing for a gen defender engine  :shock:  
drop redlinemike a pm  :wink:
dan

Title: Re: Qick Question Engine / Gearbox
Post by: Porny on February 17, 2007, 21:40:37

Quote from: "iomlr"

i have a 1988 swb defender with a j19 type turbo diesel witgh a 5 speed manual, my question is i want to put a 300tdi in so will it be a straight swop or will i need to find another gear box to match? any other modifications needed?

thnk you

Yes and no....

It can be made to fit with an Lt77 but....

Depends if you want an 'as factory' conversion so every part is avaliable 'off the shelf'....

Or you want to modify stuff to fit - which means if anything needs replacing in the future, you'd have to modify that as well?? (including water and oil pipework amoung others)


Ian

Title: Qick Question Engine / Gearbox
Post by: iomlr on February 17, 2007, 21:44:43

cheers for the replies. i'll see what i can get hold of before i start.
Thanx again.

Title: Qick Question Engine / Gearbox
Post by: muddydisco on February 17, 2007, 22:26:15

Quote from: "iomlr"

cheers for the replies. i'll see what i can get hold of before i start.
Thanx again.

Don,t go down the route of putting a 300tdi on a lt77 gear box. You have that many problems been there do that never again. Buy a r380 box etc cheaper in long run.  It looks 100 times better as well.

200 tdi all the time easy and cheaper

Title: Qick Question Engine / Gearbox
Post by: Eightpot on February 18, 2007, 00:59:52

As said, if you have a LT77 (push to the left and up to select reverse) you need to chop and reweld the engine mounts further back along the chasis rails.   I gather 300tdi's use the same chasis/mounting points as V8's rather than the old n/a, TD engines.  A 200tdi will drop straight in, though if poss get a defender unit rather than a disco as that opens up a whole new can of worms...