Mud-club
Vehicle & Technical => Discovery => Topic started by: beattiedh on November 11, 2004, 12:53:24
-
Dear all
My reversing light is stuck and I was wondering where the switch is placed before I start taking all sorts apart.
yours
Dunc
-
If it's an LT77 - get underneath the car (with suitable safety precautions of course), feel up the back of the gearbox and when you get near the top, you should be able to find a pair of wires. These are attached to the switch. They're spade connectors so should just pull off. Then you need a spanner to unscrew the switch. It's a bit of a contortion to get to it, but it's not too bad.
-
Watch out for the diff lock light that's in the same region.
Ed
-
Thanks chaps, will have a look on Sat morning.
yours
Dunc