Mud-club
Vehicle & Technical => Defender => Topic started by: jasonslaphead on March 15, 2007, 20:43:03
-
Finished fitting my lift today :D (http://www.jasonslaphead.com/assets/images/15032007213.jpg)
Going out for its maiden voyage at Hogmoor on sat
-
Cool, looks mean !! i like it :)
-
what lift kit is it :D
-
It's a 2" from paddocks britpart springs and pro comp shocks drives ok although I may replace the steering damper
-
looks really mean! nice job! 8)
-
rather than replace the damper invest in some solid steering bars - well worthwhile
-
It's a 2" from paddocks britpart springs and pro comp shocks drives ok although I may replace the steering damper
I fitted that kit......then I had to fork out for relocation cones as the springs kept jumping out of their seats & not going back in & extended brake lines. #-o
-
what wheels (size too!)
and what rubber? (size too!)
and r u runnig spacers?
Rob
-
You need some light guards on it to make it look meaner....
And a steerin guard.
Then it will look even more like mine!!!
-
Looking good mate,
I had the same prob with my lift , springs coming out ,
Be a good test run tomorrow at Bordon
-
what wheels (size too!)
and what rubber? (size too!)
and r u runnig spacers?
Rob
its 33/12.50/15 goodyear mtr's on 8x15 rims with spacers as the tyres would rub on the front arms without
I did have lightguards but they got in the way of the bumper as it sits a bit higher than standard so i had to remove them . the steering guard is now fitted
-
Sorry to hijack slightly, running the same size tyres on mine and am looking at lift kits, the 3" from M&M seems very cheap anybody used em????
(http://bobtail.org.uk/Images/ninety/ninety_14/side_done_hi_res/front_quarter.jpg)
Cheers Steve