Mud-club

Vehicle & Technical => Defender => Topic started by: ferret on April 13, 2007, 17:50:25

Title: Moving a 200tdi rad backwards.
Post by: ferret on April 13, 2007, 17:50:25

Has anyone done this and how much work was involved. Because i have a full width intercooler in front i want to move them back to fit a close fitting winch and bumper.

Title: Moving a 200tdi rad backwards.
Post by: Xtremeteam on April 13, 2007, 18:41:42

i did this to fit my FMIC along with a tight fitting winch on the front,
Moved the rad into the centre by an inch or so & then back 20mm to allow clearance,took a day to do it & had to make a new topframe to hold the rad

Title: Moving a 200tdi rad backwards.
Post by: ferret on April 14, 2007, 00:06:14

So whats involved in it. Ill have a good look tomorrow . Ive got to move it back so that the intercooler is behind where the two cross struts in front of the rad used to be.