Mud-club
Vehicle & Technical => Discovery => Topic started by: DiscoCWK on April 19, 2007, 16:52:54
-
Does anyone know if the front hub assemblies (i.e swivel housings, cv joints, outer halfshaft, etc.) from a defender 24 spline axle will fit a discovery 24 spline axle?
Thanks in advance
James
-
Yes it will fit. The swivel pins are different on a Defender tho' (bigger diameter), but the hub will bolt on at the 7 bolt flange on the back of the swivel.
HTH
-
So Defender swivels might be an upgrade for Discos with big wheels then :)
-
So Defender swivels might be an upgrade for Discos with big wheels then :)
Got a 110 24 spline front axle under my Disco for that very reason ;)
-
Cool. As another MC member put it, a day without learing is a day wasted.
-
a day without learing is a day wasted.
Did you mean that?! :D
-
Fruedian slip :oops:
Or the real reason we like to drive big trucks :wink:
-
Yes it will fit. The swivel pins are different on a Defender tho' (bigger diameter), but the hub will bolt on at the 7 bolt flange on the back of the swivel.
HTH
Thanks!
I picked up a pair for £85 Notes in mint condition - my existing swivels are badly pitted and the one CV joint is starting to go! So these were a far cheaper option.
I now have a Spare set of Hubs, Disks, Callipers, Half Shafts etc.
If Anyone is looking for good quality reclaimed landie parts around the worcester area try Paul @ Woodfield Land Rover on 07858153244