Mud-club
Vehicle & Technical => Defender => Topic started by: thepsychoman on April 23, 2007, 12:21:03
-
Hi all,
Just looking into fitting an external roll cage and it looks like I will need to relocate my Safari snorkel forward and upwards, slightly, or get a different snorkel.
I've noticed a few 90s with external cages and snorkels - but are any of these Safari ones?
Any advice welcome!
Cheers
-
Afternoon, john is selling one i believe which is designed for a roll cage contact him.
as per link
http://forums.mud-club.com/viewtopic.php?p=392583&highlight=#392583
-
Thanks Alex but (a) I want to stick with the Safari one if I can and (b) Jon's is for a 300 or TD5, not a 200 - so it runs up the wrong side of the vehicle!
-
One of the well known manufacturers of cages (can't think of their name at the moment but I will have a look through the magazines) manufactures an adapter to move the Safari Snorkle further forwards & upwards, I think it is actually not much more than a blanking plate and pattern for re-drilling the holes but as long as you don't mind the look it works well enough.
-
I was looking it to this a while back, and if my memory serves me correct, i believe Protection and Performance have relocation plates to move the snorkel without drilling/cutting etc as for price, no idea.
http://www.protectionandperformance.co.uk/
-
Your quite right Andy...
Dave.. point your browser here: http://www.protectionandperformance.co.uk/accessories.html
-
Cheers guys - I'll look into that. Probably find that the P&P plate is the same price as the Whitbread cage tho!!!! Might have to see if I can make something similar myself (re the plate, not the cage, that is).
Jon - your cunning plan re 7S looks like a go-er... more on this soon...
-
Nice!
Ill catch up with u about it over the weekend after next
-
i have fitted a roll cage and we used a safari snorkel but moved a couple of inches forward and it works fine but we did fit a 2 inch tube running down snorkal due to problems sealing the snorkal when going in water