Mud-club

Vehicle & Technical => Range Rover => Topic started by: v8kenny on May 25, 2007, 20:51:54

Title: P38 4.6 Serpentine belt
Post by: v8kenny on May 25, 2007, 20:51:54

Noticed a few tiny cracks on my drive belt so have ordered another one to be safe
Any pointers on how to change them - ie anything I should look out for before starting   :wink:
Thanks in advance........................................

Title: P38 4.6 Serpentine belt
Post by: murph on May 30, 2007, 03:49:01

Make a note of the route it takes, looks simple till you get it off  :roll:

Long spanner need for the tension wheel and 15 minutes the job should be done..  :wink:

Title: P38 4.6 Serpentine belt
Post by: v8kenny on May 30, 2007, 12:28:32

Ta Murph
I managed to download a diagram of the belt route so that should make life easier  :wink:
Looks a damn soght easier to do than normal belts

Title: P38 4.6 Serpentine belt
Post by: andycwb on May 30, 2007, 13:24:52

ISTR that getting it out (and the new one back in) through the space between the pulleys takes a little patience.  

Trivial job, though, in as much as anything LR related is trivial.

Title: P38 4.6 Serpentine belt
Post by: v8kenny on May 30, 2007, 19:53:32

HeHe - 7 minutes start to finish - wish everything was that easy on a Landy  :wink: