Mud-club

Vehicle & Technical => Suzuki => Topic started by: NEILH on May 25, 2007, 21:02:03

Title: hi lift mount
Post by: NEILH on May 25, 2007, 21:02:03

hi , just got hi lift jack for my vitara now open to ideas as to how and where to mount it when not in use. pics to help with ideas very much appriciate. thanks neil

Title: hi lift mount
Post by: generation-x on May 25, 2007, 21:30:31

neil do you have a spare wheel mount? if so and if you can weld some tube into it with a bit of flat plate weld couple of bolts and presto one hi-lift mount prob cost ya a tenner

simon

Title: hi lift mount
Post by: NEILH on May 25, 2007, 21:52:10

hi , thanks yes have spare wheel mount but cannot weld any help greatfully received.              neil

Title: hi lift mount
Post by: generation-x on May 25, 2007, 21:59:40

ok m8 another way is to use ur spare wheels remaining holes not use on the mount get some long bolts enuf to just be a longer than the tyre u have on the back couple of nyloc nuts and a couple of wing nuts.
put 2 bolts throu 2 spare nut holes in ur spare wheel and lock tight with the nyloc nuts put back onto you mount then put ur hi-lift over the 2 new bolts and tighten down with the wing nuts the jack will tighten against ur spare tyre

hope this helps

simon

Title: hi lift mount
Post by: NEILH on May 25, 2007, 22:16:49

thanks thats a good idea will look at the tomorrow on holiday next week so can play about with it. thanks   neil