Mud-club

Vehicle & Technical => Discovery => Topic started by: dave_2A_2.25Turbo on May 30, 2007, 07:31:37

Title: Seats
Post by: dave_2A_2.25Turbo on May 30, 2007, 07:31:37

Will the seats from a S2 fit a 200TDi?  Been offered a setin quite nice nick.

Title: Seats
Post by: Skibum346 on May 30, 2007, 07:59:26

If it's a 3 dfoor I doubt it.

I got hold of a nice one for wifie but even taking the runners off I couldn't find a way to make it fit the tiult mechanism.

Skibum

Title: Seats
Post by: thermidorthelobster on May 30, 2007, 08:18:33

Quote from: "Skibum346"

I got hold of a nice one for wifie but even taking the runners off I couldn't find a way to make it fit the tiult mechanism.

Have you tried fitting it to the car instead of your wife?

Title: Seats
Post by: Skibum346 on May 30, 2007, 08:19:29

Quote from: "thermidorthelobster"

Quote from: "Skibum346"

I got hold of a nice one for wifie but even taking the runners off I couldn't find a way to make it fit the tiult mechanism.

Have you tried fitting it to the car instead of your wife?

 #-o  DOH!

That might explain it...

Title: Seats
Post by: dave_2A_2.25Turbo on May 30, 2007, 08:23:22

5- door, so the fronts are too much of a problem (hopefully) - I was thinking more about the rears

Title: Re: Seats
Post by: RichardM on May 30, 2007, 20:26:38

Quote from: "dave_2A_2.25Turbo"

Will the seats from a S2 fit a 200TDi?

I've just got it...A series two Disco....I was wondering why you would want seats from a Series II LR in a Disco..."

Title: Seats
Post by: dave_2A_2.25Turbo on May 30, 2007, 21:15:57

Hehe - I might be a masochist (hence I have a Series 2A) - but not that much!