Mud-club
Chat & Social => The Bar - General Chat => Topic started by: paul and sam on June 05, 2007, 20:05:18
-
evening all i have a problem ...... :(bloodshot): i bouht a safari snorkal second hand from a auto jumble on the weekend and have looked at fitting it .... :(bigangry): does anyone have or know where i can get a template for the wing as i know that i will louse it up if i try to go it alone. i think its for a 300TDI and the p/n is SS HF 300 made by luxons many thanks
-
I have a template for a 300tdi with abs. I could make a copy of it and post it to you if you like.
Me making this offer now makes me think hard on where on earth I have put it! :roll: If anyone else offeres in the mean time ........... :lol:
-
i think its for a 300TDI
Isn't yours a 200tdi though? IIRC the fitting is different.
-
That s/n rings a bell, sure it's the same as the one off my snorkel, which is a 200tdi model. When I get round to fitting mine I can send the template on to you if you want (I'll check the s/n on the snorkel tomorrow just to be sure it's the same one...)
-
They are different.
The 200tdi uses a D shaped hole which passes through the wing and plumbs directly into the airbox using the original hole in the inner wing.
http://www.landyworld.co.uk/discoverysnorkel.htm
The 300tdi uses a circular hole and the inner wing needs to be cut (Pig) for the pipe to pass through. Mine has ABS and I had to slacken the wiring loom to fit. Safari say 2 hours - Horlicks!!
http://members.mud-club.com/profiles/auf_wiedersehen_pet/gallery/uiopiuyt
They look the same on the outside. I have a 300tdi template which you could borrow if you like.
-
hi narked i have checked the s/n and it is from a 200 tdi model if you would be able to send a cpoy of the template i woul be very greatfull many thanks
-
Ok, will do. PM me an address and as soon as I'm done with it I'll send it your way. Will hopefully get round to doing mine this week sometime.