Mud-club
Vehicle & Technical => Defender => Topic started by: Patty on June 07, 2007, 14:10:32
-
I have just fitted some new wheels on my defender and now when ever i go over 50mph and slight turn of the wheel etc and i get serious wobble with the steering. Any suggestions how i can stop this?
-
Get them balanced?
-
yup i'd say blancing for definate, or, more seriously have you checked all the nuts are tight and nothing is trapped between the wheel face and the hub?
-
Get them balanced?
This is where i would start too and what spinkster said
Have you gone up to bigger tyres as well?
If it's not the balance then here's some other things i would suggest you check
Play in the steering ball joints, track rod ends, and UJ in the steering column. Shims and preload on the swivels. Steering damper
I had the same problem and it turned out to be the bushes i had fitted to the panhard rod weren't up to the job so i went back to Metalastic ones and this cured it.
HTH