Mud-club
Vehicle & Technical => Discovery => Topic started by: Disco-Ron on June 11, 2007, 22:27:52
-
Basically i've done 2 rear diffs in 4 weeks, do i keep fitting 2nd hand ones? 4 pin one....... or would a salisbury axle fit???
Thoughts please!
Disco 1.. 200 tdi!
-
take the lead weight out of your right boot :D
-
theres 3 ways to do this
fit a 4 pin diff
fit a ARB locker
Fit a salsbury
make it 4
Learn to drive :roll:
what shafts do you have?
Personally for the price of a 4 pin diff itself its not much dearer to go for an ARB,
A slasbury would requre shortening the prop & theres a 90% chance of getting a drum brake one as the disc ones go for good money
or the cheapest option off all is analyse where ur blowin the diffs,how ur blowin the diffs to then work out why ur blowin diffs
Redline "broken 2 shafts in 4 years" mike
-
theres 3 ways to do this
fit a 4 pin diff
fit a ARB locker
Fit a salsbury
make it 4
Learn to drive :roll:
what shafts do you have?
Personally for the price of a 4 pin diff itself its not much dearer to go for an ARB,
A slasbury would requre shortening the prop & theres a 90% chance of getting a drum brake one as the disc ones go for good money
or the cheapest option off all is analyse where ur blowin the diffs,how ur blowin the diffs to then work out why ur blowin diffs
Redline "broken 2 shafts in 4 years" mike
must lay off the sauce :oops:
-
I was doing a trial on sunday.... got cross axled big time, then got out, and just driving up the hill...BANG!!!!
must've cracked something when crossed up.....
not allowed lockers in the trial, plus don't really wanna spend that much..... what are the 4 pin ones like?? anyone broken one??
-
Just taken it apart, the planet gears have broken and fallen out of the diff, and the ends of both shafts are twisted....
So, i'm pretty sure that mine is a metric axle, if i was to get a 24 spline diff, with matching shafts are they a striaght forward swap????
-
dont make no difference :wink:
your still gonna blow the center carrier of the 24spline diff :roll: in the exact same way as the 10 splines
2 much wheel spin or in the case of weekend, torque going through it one way
fit a arb locker, that'll cure the poblem with it being a 4 pin
then for trials, simply dis-able the compressor :wink: and when on pay'n'break days, connect the compressor up
:wink:
dan
-
MMm, well one of my mates just told me that the 24's are a bit stronger, the planet gears that is......
I can't stretch to an Arb... so another old diff it'l be then!!
with shafts!!
-
MMm, well one of my mates just told me that the 24's are a bit stronger, the planet gears that is......
I can't stretch to an Arb... so another old diff it'l be then!!
with shafts!!
planet gears are same setup as the 10 splines, just more expensive when u bklow them
dont spin the wheels when u are cross axled as this is why ur blowin diffs
-
sorry but are they my back side :lol:
the shafts r stronger
but there is no difference in the diff units them selves, apart from the splines on the sun gears
they are mad and secured in the same way and will break in exactly the same way :roll:
only way to cure the problem is loosing the heavy right foot when the wheels r spinning
or fit a 4pin diff i.e a arb
but until you can afford, keep the revs down :shock: ,and when winching keep the revs to a min, im just above tickover when winching
dan
-
Thanks guys..... i did wonder when he said it, i do know how these things work, and couldn't see the difference unless the materilas were slightly bette maybe...
Whatever, i'll get an other old diff, and give my lead boot a day off when i'm playing!!
-
:lol:
try it, not digging, but you'll be suprised :wink:
people get there hair off and blame the landy, but...it would happen to any diff, even a truck diff :shock:
just give the lead a early retirement :lol: